Power

High-end amplifiers capable of driving every speaker.

Power

Hegel H20
 

The Hegel H20 incorporates the latest version of the Hegel FET-technology. A practical benefit of the H20 FET-technology is a more rhythmic sound. It is simply better at re-creating a bass line. Another vital element is the removal of harmonic echoes in the higher frequencies, which result in a lot more detail and still a smoother and more natural sound. The core design of the H20 is based on the H30 reference amplifier, with the best possible implementation of our patented and laser trimmed SoundEngine modules. Also designed in the timeless Hegel look, it will fit in any modern or classic home. Just one single button on the front and a solid bead blasted and anodized front panel. A truly rigid design with well over 1,5 kg of aluminium in the front panel alone.

New too the H20 is bead blasted and anodized top and side covers. This adds to the exclusive look, and the overall design is more consistent. The Hegel H20 is a remarkable power amplifier with power capabilities of more than 130 Ampere. Extremely low distortion levels. Amongst the highest damping factor in the industry, and full control of the loudspeakers. All this to give you the most natural, rhytmic and dynamic sound on the market today.

Technical Details

Output power: More than 200W + 200W in 8 ohms, Dual mono
Inputs: RCA unbalanced and XLR balanced
Speaker outputs: Two pairs of heavy duty gold plated terminals
Input Impedance: Balanced 10kohm, unbalanced 50kohm
Frequency response: Less than +/- 0.2 dB deviation 20Hz-20kHz
Phase response: Less than 2 degrees deviation 20Hz- 20kHz
Signal to noise ratio: More than 100dB
Crosstalk: Less than -100dB
Distortion: Less than 0.006 % at 100W i 8 ohm
Intermodulation: Less than 0.01 % (19kHz + 20kHz)
Damping factor: More than 1000
Power supply: 1000VA dual mono, 90 000uF capacitors
Output stage: 20 pcs 15A 200W high speed, Ultra low distortion bipolar transistors
Power consumption: 60W in standby switched on
Dimensions/weight: 12cm x 43cm x 37cm (HxWxD), weight 25kg
Dimensions/weight US: 4.7" x 17" x 15" (HxBxD), weight 55 lbs

Hegel H20
 

Where to buy

If you are interested in our products and would like to try or buy one, please find the authorized Hegel distributor in your country. Our dealers are qualified to tell you everything you need to know and help you start your Hegel experience. Please click the button below to go to the distributors list.

Find your Hegel dealer

Follow us

Is the Hegel H20 available in different colours?
The Hegel H20 is available in the standard "Pearl silver" and black colour. The finish is made by blasting the solid Aluminium panels with tiny glass particles and anodizing the surface.
Can the Hegel H20 be used with other Pre Amplifiers than Hegel?
All the different Hegel units has got a neutral sound signature, so that they can be used together with other high quality audio units from different manufacturers. However we recommend you to listen to a combination of a H20 and a P30, as this combination has got a very high performance in this price range.
Is the Hegel H20 true balanced?
The balanced inputs of the H20 are, as all the other Hegel units, using true electronically balanced inputs.
Is the patented SoundEngine amplifier technology used in the Hegel H20?
The H20 is using the new and improved version of the patented Hegel SoundEngine technology. The SoundEngine modules are laser trimmed to an extremely low distortion. The power amplifier part of the H20 is based upon technology from the Hegel H30 reference power amplifier.
What is the power consumption of the Hegel H20?
Because of the SoundEngine technology used in the H20, there is no need to run a high bias current in the output stage of the amplifier. The H20 will as all the other Hegel amplifiers use a minimum of power in standby mode when it is not playing music. The H20 will use about 60W of power in idle mode, the same as a normal light bulb.

Our website uses cookies. Please accept or read more. Cookie Info