With its powerful 2x200 watt and a dual mono power supply the H200 has a more dynamic and rhythmic sound than its little brothers. The H200 fills the gap between the integrated amplifier H100 and the combination of the P4Amk2 pre amplifier P4Amk2 and H20 power amplifier. A new feature of the H200 is the Home Theatre input, allowing you to combine it with an external Home Theatre system.
The H200 has a relay switched input source selector and can be connected to different types of music sources. A display shows the selected input source and volume setting. The integrated amplifier has a new digitally controlled active preamp stage and the new improved SoundEngine amplifier modules. It has got both balanced and unbalanced inputs.
The idea behind the H200 project was to design a new generation of amplifiers based on the new and improved SoundEngine amplifier technology from the H4SE power amplifiers, combined with a completely new digitally controlled active preamp stage. We wanted to make a platform for integrated amplifiers. A platform where we kept the very dynamic and powerful presentation from the separates in a more affordable package, without losing too much of the resolution and fine detail. The result is the H200. An extremely musical integrated amplifier. Completely stripped of the classic “transistor sound” and still capable of driving the most dynamic loads.
Technical Specifications
Output power: 200W + 200W in 8 ohms, 350W + 350W in 4 ohms
Inputs: CD (RCA), Aux (RCA) and balanced (XLR)
Home Theatre input: Fixed to level 85 (RCA)
Outputs: 2 pcs Pre Out (RCA), 1 pcs Recording output (RCA)
Speaker outputs: Two pairs of heavy duty gold plated terminals
Input impedance: Balanced 50kohm, unbalanced 11kohm
Frequency response: Less than +/- 0.2 dB deviation 20Hz-20kHz
Phase Response: Less than 2 degrees deviation 20Hz- 20kHz
Signal to noise ratio: More than 100dB
Crosstalk: Less than -100dB
Distortion: Less than 0.006 % at 100W i 8 ohm
Intermodulation: Less than 0.01 % (19kHz + 20kHz)
Damping factor: More than 1000
Power Supply: 1000VA dual mono, 90 000uF capacitors
Output stage: 20 pcs 15A 150W high speed bipolar transistors
Power consumption: 60W in standby switched on
Dimensions/weight: 12cm x 43cm x 38cm (HxWxD), weight 25kg
Dimensions/weight US: 4,7" x 17" x 15" (HxBxD), weight 55 lbs
